Energy efficiency is central to most definitions of high-performance buildings. It is also central to BSC’s consulting, research, and education activities. At BSC, we believe in promoting energy efficiency and environmental responsibility within the constraints of marketable and affordable building technology.
The documents below discuss why energy is critical to sustainability and how to define and understand energy use (for example, through energy metrics). They also touch on key issues in energy reduction in buildings, such as thermal control and advances in window technology for commercial and residential buildings.
When I see a fully glazed, floor-to-ceiling commercial or institutional building, I see an energy-consuming nightmare of a building that requires lots of heating and cooling at the perimeter just to maintain comfort. The result, on a cold winter day, is that offices exposed to the sun require cooling, while those in the shade need heat.
An edited version of this Insight first appeared in the ASHRAE Journal. Many “green” buildings don’t save energy. Why? They have too much glass, they are over-ventilated, they are leaky to air, they are fraught with thermal bridges and they rely on gimmicks and fads rather than physics.
This article was first published in "Perspectives," Volume 17, Number 1. Spring 2009. The on-going consumption of energy to operate, condition, and light a building, as well as the energy embodied in on-going maintenance is the largest single source of environmental damage and resource consumption due to buildings. Reducing the operational energy use and increasing durability should be the prime concerns of architects who wish to design and building “green” buildings.
The future is uncertain. This is a truism, and yet, when we design and construct a new building, we need to make decisions in the present or very near future. In fact, this is one of the critical distinctions about designing buildings: they are expected and likely to last 50 to 100 years, but we build them now. The challenge of designing for the future is no more acute than in the current choices facing the designer of an environmentally friendly building.
An edited version of this Insight first appeared in the ASHRAE Journal. Energy security is pretty easy to get a handle on—don’t buy oil from the Middle East, Russia, Nigeria and Venezuela. The problem is that it is not cheap energy and it is not clean energy. We can make it clean, and we will, but it will be even more expensive. And actually that is good because we won’t waste it when it is expensive.
