Masonry walls are generally highly durable. However, when masonry walls in cold climates stay too wet for too long, freeze-thaw damage can occur. This issue has particular relevance for energy efficiency retrofits, because the addition of interior insulation causes the masonry to stay colder and have a lower drying potential.
The following documents present details of BSC’s research and experience regarding the prevention of freeze-thaw damage in retrofit projects. Technical topics such as the critical degree of saturation (Scrit) are discussed, and case studies and recommendations are provided.
An edited version of this Insight first appeared in the ASHRAE Journal. To claim that something that has holes in it can act as a water control layer is a pretty interesting argument. It is both true and untrue.
An edited version of this Insight first appeared in the ASHRAE Journal. The Parthenon was constructed around 450 B.C. as a temple to the Goddess Athena. More recently a temple overlooking Vancouver was constructed by the contractor Gauvin the Younger to honor the God of Building Science Hutcheon. For the past five years the Devout have been sprinkling water on the temple Icons carefully watching the results.
An edited version of this Insight first appeared in the ASHRAE Journal. Engineers are pretty funny people. Engineers say that 1 inch of water exerts a force of – wait for it – 1 inch. Yup, 1 inch of water weighs 1 inch of water. It’s a gift we engineers have. Let me help you all out a little bit here, go suck on a straw and draw 1 inch of water up into the straw.
An edited version of this Insight first appeared in the ASHRAE Journal. It was the ants that finally did it. It wasn’t the shingles that needed to be replaced. It wasn’t the three-dimensional airflow network in the roof assembly. It wasn’t the lack of racking resistance. It wasn’t the lack of thermal resistance. It was the ants. Carpenter ants. There were just too many ants in my renovated barn.
An edited version of this Insight first appeared in the ASHRAE Journal. Imagine a three-dimensional molecular billiard game with billiard balls that are sometimes sticky, and where the rules depend on where you are on the table. Then assume that there are many different types of tables and pockets of different sizes.
An edited version of this Insight first appeared in the ASHRAE Journal. One of the more difficult questions regarding enclosures is can we insulate the interior of a mass wall in a cold climate without causing damage from freeze/thaw cycles? The answer is usually yes, we can insulate. But, and there is almost always a “but,” it depends.
A concise history of the improvements to traditional buildings through design and materials.
An edited version of this Insight first appeared in the ASHRAE Journal. Five fundamental changes to building construction have occurred in the last 50 years – they happened so gradually, so insidiously that we missed their enormous significance.
An edited version of this Insight first appeared in the ASHRAE Journal. Spain gave Florida to the United States in exchange for the United States giving up any claims on Texas. Nobody really wanted to live there except the Seminoles until air-conditioning was invented.
An edited version of this Insight first appeared in the ASHRAE Journal. Stucco was once viewed as a cladding system that solved moisture problems—it is now viewed as one that causes moisture problems. What happened?
An edited version of this Insight first appeared in the ASHRAE Journal. Mold is pretty easy to understand. No water no mold. Any questions? Well, there are a few. For one we have more mold today, but we don’t have more water. What’s with that?
An edited version of this Insight first appeared in the ASHRAE Journal. Sometimes things are so obvious we miss them. The Second Law of Thermodynamics is like that. Most of us get the heat goes from warm to cold thing. It’s the other simple applications of the Second Law that we miss.
An edited version of this Insight first appeared in the ASHRAE Journal. You have got to love salesmen. They figure things out way before physicists, usually before engineers and certainly before greenie weenies. They found, what we should all know, that it is much more cost effective to fix the enclosure so that the actual system that you need is small and therefore does not cost much to install and does not cost much to operate. Oh, by the way, this approach also saves energy. Who knew?
An edited version of this Insight first appeared in the ASHRAE Journal. So what do you do when you have an old building and the walls aren't doing their job? What do you do when the walls look bad, leak and are falling apart? You give them a face-lift.
An edited version of this Insight first appeared in the ASHRAE Journal. Water causes enough trouble by itself, but when we add salt we go to a whole different level, especially where porous materials are concerned. What is the deal with porous materials? Simple, porous materials are capable of wicking water large distances due to capillary suction. And when water can move large distances only bad things can happen.
An edited version of this article was first published in the ASHRAE Journal.
I have loved bourbon for a long time. I like the history. And I like the independent spirit of the folks who make it, their sense of tradition, and their willingness to continue to experiment. Even now after two hundred years of history, they experiment mostly by trial and error rather than by computer simulations. I have often thought that if engineers were in the liquor business, bourbon would be the liquor they would make.
An edited version of this Insight first appeared in the ASHRAE Journal. Ever wonder how we can build a 50 story glass tower that doesn’t leak, but we can’t seem to build a two-story house that doesn’t leak? The answer is a little bit of counter intuitive thinking.
An edited version of this Insight first appeared in the ASHRAE Journal. Perhaps it was the drug culture of the 60’s that turned brains into coleslaw but it is hard to understand the lunatic practice of placing a layer of sand over the top of a plastic ground cover under a concrete slab in California.
